Solid Surface, in particular worktop drainer grooves, can be manufactured with almost any design detail in mind.
Drainer Grooves is one of these features that comes in many different guises, and although all perform the function of draining water back into the bowl, the aesthetics of each comes down to personal choice.
If these is a specific drainer groove pattern that you have had before, or that you would like, just ask us and we can give you a quote to achieve the desired design.
Recessed (3mm wide deep, can be flat or sloped into bowl)
* This design can also have grooves in the recessed section to any of the other designs.
Sloped (0mm to 5mm sloped drainer)
* This design can be tailored to meet a specific design.
Double (25mm wide grooves x 5 lines)
* This design can be altered in terms of the number/length of grooves specified.
Designer (13mm grooves x 7 lines)
* This design can be altered in terms of the number of grooves specified.
Straight 13×7 (13mm grooves x 7 lines)
* This design can be altered in terms of the number of grooves specified.
Straight 25×6 (25mm grooves x 6 lines)
* This design can be altered in terms of the number of grooves specified.
Straight Custom (13mm grooves x any specified number of lines to fit specified sink model)
* This design can be altered in terms of the number of grooves specified specific to customers design.
Angled
* This design can be altered in terms of the number of grooves specified and the angle that is applied dependant on the kitchen design.
Leaf
* This design can be altered in terms of the number of grooves specified and the angle that is applied dependant on the kitchen design.
Staggered
* This design can be altered in terms of the number of grooves specified and the angle that is applied dependant on the kitchen design.
